home *** CD-ROM | disk | FTP | other *** search
/ Magnum One / Magnum One (Mid-American Digital) (Disc Manufacturing).iso / d2 / scout.arc / SCOUT.DOC < prev    next >
Text File  |  1989-10-12  |  94KB  |  1,777 lines

  1.  
  2.  
  3.                                 SCOUT
  4.  
  5.                      A Memory Resident File Manager
  6.  
  7.                               Version 3.4
  8.  
  9.                       (tm)  ┌─────────┐
  10.                       ┌─────┴───┐     │ MEMBER
  11.                    ───│         │     │────────────────
  12.                       │  ┌──────┴──┐  │ Association of
  13.                       │  │         ├──┘   Shareware
  14.                       └──┤    ■    │    Professionals
  15.                    ──────│    ║    │───────────────────
  16.                          └────╨────┘
  17.  
  18.                               by New-Ware
  19.                         Copyright 1986,87,88,89
  20.                           All Rights Reserved
  21.  
  22.      This program is produced by a member of the Association of
  23.      Shareware Professionals (ASP).  ASP wants to make sure that the
  24.      shareware principle works for you. If you are unable to resolve a
  25.      shareware-related problem with an ASP member by contacting the
  26.      member directly, ASP may be able to help. The ASP Ombudsman can
  27.      help you resolve a dispute or problem with an ASP member, but does
  28.      not provide technical support for members' products. Please write
  29.      to the ASP Ombudsman at P.O. Box 5786, Bellevue, WA 98006 or send a
  30.      Compuserve message via easyplex to ASP Ombudsman 70007,3536.
  31.  
  32.      SCOUT is a Shareware product.  A Shareware product is one that is
  33.      distributed through public access channels in order that 
  34.      prospective buyers may evaluate the product before making a 
  35.      decision to buy.  Shareware software is not public domain 
  36.      software and is not free.  It is fully protected by State and 
  37.      Federal copyright laws, is offered for sale, and is fully 
  38.      supported by its author.  Unlike any other commercial 
  39.      distribution method, Shareware permits you, the user, to try out 
  40.      the product on your machine so that you can better decide whether 
  41.      the product meets your needs and expectations.
  42.  
  43.      If you try SCOUT and decide for any reason that it does not meet 
  44.      your needs and that you will not use it, then you don't have to 
  45.      face the inconvenience of calling or writing for a refund.  Don't 
  46.      use it, don't buy it.  But if you do like SCOUT and you use it,
  47.      then you are obligated to pay for it.  How much do you pay?
  48.  
  49.                 Level 1 registration          $30.00
  50.                 Level 2 registration          $35.00
  51.                 Level 3 registration          $40.00
  52.  
  53.      Level 1 registration is the basic price for SCOUT and entitles 
  54.      you to legally use the program.  Level 2 registration entitles you
  55.      to a printed manual and a diskette containing the latest version.
  56.      Level 3 registration buys you the expanded memory version of SCOUT.
  57.      More about that later.  All registered users recieve as much
  58.      technical support as necessary to ensure that SCOUT works properly
  59.      in their system.
  60.  
  61.      How do you register?  You may register in one of three ways.  By
  62.      mail, by phone, or by Bulletin Board System (BBS).  New-Ware
  63.      NOW ACCEPTS VISA/MASTER CARD REGISTRATIONS.  To register using
  64.      your Visa/Master Card, please fill out the following form and
  65.      have it ready when you call (voice or BBS) or include it by mail.
  66.  
  67.      NOTE:  YOU MAY FILL OUT AND PRINT A REGISTRATION FORM DIRECTLY
  68.             FROM SCOUT'S MAIN SCREEN.  SIMPLY POP UP THE MAIN SCOUT
  69.             DISPLAY AND PRESS ^R (Control R).
  70.  
  71.      SCOUT REGISTRATION FORM
  72.      -----------------------
  73.  
  74.      Last name:________________________________________
  75.      
  76.      First name:_______________________________________
  77.  
  78.      Street address:___________________________________
  79.  
  80.      City:_____________________________________________
  81.  
  82.      State:____________________________________________
  83.  
  84.      Zip code:_________________________________________
  85.  
  86.      Telephone number:__________________________________
  87.  
  88.      Card Type (Visa or Mastercard):____________________
  89.  
  90.      Card number:_______________________________________
  91.  
  92.      Expiration date:___________________________________
  93.  
  94.      Signature (if by mail):____________________________
  95.  
  96.      To register by voice phone, have the above form filled out
  97.      and call (619) 455-6225.  To register on-line on the Shareware
  98.      Products BBS, have the form ready and call (619) 455-5226 (300/
  99.      1200/2400 baud - N81).  If you register for SCOUT-EM, wait for a
  100.      a day for your card to be validated and call the bulletin board
  101.      again.  You will be given access to download SCOUT-EM for 
  102.      immediate use.  The disk and manual will still be mailed to you.
  103.  
  104.      To register by mail, send check, money order, or the form to:
  105.  
  106.                          New-Ware
  107.                          6198 Agee Street #71
  108.                          San Diego, CA 92122
  109.  
  110.      California residents must include 7% state sales tax.  For
  111.      technical support and/or questions, you can reach me via 
  112.      Compuserve (EASYPLEX/IBMSW forum - 71535,665), or by phone at:
  113.  
  114.                          (619) 455-6225 [Voice]
  115.                          (619) 455-5226 [BBS]
  116.  
  117.  
  118.      License
  119.      -------
  120.  
  121.      Copyright 1986,1987,1988,1989 by New-Ware.  All Rights Reserved.
  122.  
  123.      You are free to copy and distribute SCOUT for noncommercial use 
  124.      IF:
  125.  
  126.              NO CHARGED IS CHARGED FOR COPYING OR DISTRIBUTION
  127.              (Disk vendors please see VENDOR.DOC)
  128.  
  129.              IT IS NOT MODIFIED IN ANY WAY.
  130.  
  131.      Bono fide computer user groups or clubs may make copies of SCOUT
  132.      for distribution to members for a fee that covers copying and
  133.      other adimistrative costs.  Bulletin Board Systems (BBS) that
  134.      operate through subscription fees may post SCOUT for download
  135.      by its subscribers.  All others may only make archival (back-up)
  136.      copies of SCOUT and may not charge a fee for its distribution.
  137.  
  138.      Volume discounts, site licenses, commercial licenses are available.
  139.  
  140.      This program is provided AS IS without any warranty, expressed or
  141.      implied, including but not limited to fitness for a particular
  142.      purpose.
  143.  
  144.      The author is a member of the Association of Shareware 
  145.      Professionals (ASP).
  146.  
  147.      A version of SCOUT that runs in expanded memory is also available 
  148.      directly from me.  This version runs in conjunction with the Lotus, 
  149.      Intel, Microsoft (LIM) standard for Expanded Memory (EMS), 
  150.      version 3.2 to 4.0.  It requires less than 6k of normal RAM and is
  151.      known to be compatible with AST RAMPage, Intel Above Board, Tall
  152.      Tree JRAM 3, and Quarterdeck QEEM EMS boards and drivers.
  153.  
  154.  
  155.      I.  INTRODUCTION
  156.  
  157.           SCOUT is a memory resident disk/directory/file manager and
  158.      DOS shell that may be invoked from the DOS level or from within
  159.      an active applications program.  Memory resident means that
  160.      when SCOUT is executed, a portion remains active in memory
  161.      waiting to be called via the keyboard.  The rest of SCOUT (the
  162.      majority of its code, in fact) resides in a file called an
  163.      overlay file.  This file is named SCOUT.000 and contains
  164.      approximately two-thirds of SCOUT's run-time code.  When SCOUT
  165.      needs a function imbedded in the overlay file, it needs to know
  166.      its location so that it can access that file and load the
  167.      required code.
  168.  
  169.           SCOUT has been designed to with two primary goals in mind.
  170.      The first design goal is that it must be accessible from any
  171.      applications program as well as from the DOS level.  That is
  172.      why it is a memory resident program.  The second design goal is
  173.      to limit the keystrokes required to perform a specific
  174.      disk/directory/file management function to the absolute
  175.      minimum.  The achievement of these two goals means that a user
  176.      can be busy at work in an applications program and quickly call
  177.      SCOUT into action to perform some disk housekeeping chore and
  178.      return to productive work with a minimal interruption.
  179.      Housekeeping includes copying, moving, renaming, and deleting
  180.      files and a whole host of other functions.
  181.  
  182.           A third design goal was to make SCOUT as compatible as
  183.      possible with the tremendous range of applications programs
  184.      available for the IBM PC (and clones) as well as a number of
  185.      other memory resident programs.  While it cannot be guaranteed
  186.      that SCOUT will operate perfectly with every program, it is
  187.      safe to say that it works with the vast majority of
  188.      applications and memory resident utilities available today.
  189.  
  190.      The following is a summary of SCOUT's major features:
  191.  
  192.                 +  Execute programs
  193.                 +  Move, copy, delete individual files
  194.                 +  Move, copy, delete tagged files
  195.                 +  Rename files, directories, volume labels
  196.                 +  Create, remove directories, volume labels
  197.                 +  Change file attributes
  198.                 +  Sort files in five different ways
  199.                 +  Specify ascending or descending sorts
  200.                 +  User defined activation ("hot") keys
  201.                 +  Format 3.5 and 5.25 inch diskettes
  202.                 +  Search entire disk for files
  203.                 +  Print directory listing of files
  204.                 +  Send printer control codes to printer
  205.                 +  Print a text file (formatted or unformatted)
  206.                 +  View a text file
  207.                 +  Search a text file for a specified string
  208.                 +  Change directory with single keystroke
  209.                 +  Change drives
  210.                 +  List unused space on all drives
  211.                 +  View monthly calendar
  212.                 +  View ASCII table
  213.                 +  Automatically tag files for move, copy, delete
  214.                 +  Print Graphics screen image (CGA only)
  215.                 +  Save screen image to text file
  216.                 +  View system memory allocation
  217.                 +  Reset file archive bits
  218.                 +  Copy (backup) updated files
  219.                 +  Set system date/time
  220.                 +  Set file date/time
  221.                 +  Strip Wordstar files during copy
  222.                 +  Remove from memory
  223.                 +  CRC checking during file copying
  224.  
  225.      All of the above features except for the first (execute program)
  226.      and the last (remove from RAM) are available by calling SCOUT
  227.      while running an applications program.
  228.  
  229.      II.  CONFIGURING AND INSTALLING SCOUT
  230.  
  231.           SCOUT is capable of being executed right from the floppy
  232.      diskette it was delivered on.  In fact it is suggested that the
  233.      user place the SCOUT disk in drive A: (it must be drive A, not
  234.      B), go to drive A by typing A: and entering command SCOUT from
  235.      the DOS command line.  SCOUT will load and be ready to be
  236.      called whenever the keystroke combination of Alt-F10 is
  237.      pressed.  Don't worry, if this combination is not satisfactory,
  238.      it can be changed.
  239.  
  240.           SCOUT can now be "test driven".  Press the Alt key and the
  241.      F10 key simultaneously and the main SCOUT display will replace
  242.      the current screen.  Press the Esc key and the main SCOUT
  243.      screen will be replaced by the screen it replaced.  Try
  244.      pressing the " " (backward prime) key.  This is the secondary
  245.      method to bring up SCOUT.  Try changing to another drive in the
  246.      system by pressing the "d" key with the main window displayed.
  247.      SCOUT will ask "Which drive?".  Simply press the letter key of
  248.      the desired drive.  SCOUT will change to the active directory
  249.      of the specified drive and display the files (up to 250 max) in
  250.      that directory.  Press Esc and notice that SCOUT exited back to
  251.      the drive and directory it was intially activated from.  Now
  252.      bring up SCOUT again and remove it from memory by pressing the
  253.      Ctrl and End keys simultaneously.
  254.  
  255.      Installing and customizing SCOUT for a particulary PC system is
  256.      accomplished by executing the CONFIG.COM program.  First, copy
  257.      the SCOUT files to one of the permanent drives in your system.
  258.      It is recommended, but not required, that this be the drive you
  259.      boot up from.  You may wish to create a subdirectory named
  260.      SCOUT and place all SCOUT files in that directory or you can
  261.      place them in any directory you desire.  IMPORTANT!!  It is
  262.      mandatory that the program named RUNFILE.EXE be placed in the
  263.      ROOT directory of the drive from which you intend to initially
  264.      load SCOUT.  You will not be able to run programs from SCOUT if
  265.      this is not accomplished!
  266.  
  267.      Execute the configuration program by entering the following
  268.      from the DOS command line: CONFIG SCOUT.  The configuration
  269.      program will load and display the following main menu:
  270.  
  271.                            SCOUT Configuration Options                         
  272.                                                                                
  273.                    [A]  Assign overlay file access path                        
  274.                    [B]  Assign SCOUT activation key                            
  275.                    [C]  Assign default file mask keys                          
  276.                    [D]  Assign directories to function keys                    
  277.                    [E]  Assign printer codes                                   
  278.                    [F]  Assign default sort                                    
  279.                    [G]  File copy date/time setting                            
  280.                    [H]  Set printer margins                                    
  281.                    [I]  Assign favorite programs                               
  282.                    [J]  Set Prime Key                                          
  283.                    [K]  Set CGA snow avoidance                                 
  284.                    [L]  Set floppy drive parameters                            
  285.                                                                                
  286.                    [ESC]  Quit                                                 
  287.                                                                                
  288.                    Make selection:                                             
  289.  
  290.      The most important item on this menu is item A.  In order for
  291.      SCOUT to function properly, it must know the location of the
  292.      supporting overlay file.  It will not load into memory unless
  293.      it can locate the overlay file.  Selecting item A will result
  294.      in a prompt to enter the DOS full path name where the overlay
  295.      file SCOUT.000 will reside.  Be sure to enter the FULL path
  296.      name as in the following examples:
  297.  
  298.                      C:\UTILITIES
  299.                      D:\
  300.  
  301.      When you have finished configuring SCOUT, be sure to place
  302.      SCOUT.000 in the directory you specified here.
  303.  
  304.      Item B on the main menu allows user selection of the "hot" key
  305.      combination that is used to activate SCOUT.  The default is
  306.      Alt-F10 but that can be permanently changed to any one of the
  307.      following key combinations:
  308.  
  309.                        Alt    F1 thru F10
  310.                        Alt    Q,W,A,S,Z, or X
  311.                        Ctrl   F1 thru F10
  312.                        Shift F1 thru F10
  313.  
  314.      The key combination that most appeals to you may be the same
  315.      key combination that is used in one of your application
  316.      programs.  Don't worry about it, SCOUT provides the ability to
  317.      temporarily disable the hot key as long as the prime key is not
  318.      disabled (more about this later).
  319.  
  320.      Item C on the main menu permits assigning DOS file mask strings
  321.      to the ten numbered keys at the top of the PC keyboard.  DOS
  322.      file masks may include wild card characters such as "?" and
  323.      "*".  For example, assigning the string "*.BAS" to the number 2
  324.      key will provide you with a means of viewing all the files in
  325.      the current directory with an extension of ".BAS" with just one
  326.      keystroke.  Or assigning the string "AB??.*" to number 7 will
  327.      result in SCOUT showing just those files starting with "AB"
  328.      with names 4 characters long and having any extension, when the
  329.      7 key is pressed.
  330.  
  331.      Item D on the main menu brings up another menu that permits
  332.      assigning macros to the ten function keys on the PC keyboard.
  333.      The macros are strings that will be entered for you in response
  334.      to various SCOUT prompts for drive/directory path names.  For
  335.      example, suppose the string "C:\WORDSTAR" is assigned to the F5
  336.      function key.  Then any time SCOUT prompts for a destination
  337.      directory (such as in copying or moving files), simply pressing
  338.      the F5 key saves the effort of typing in the entire path string
  339.      and hitting the enter key.  Note that the drive specifier may
  340.      or may not be included in the macro strings.   If it is, SCOUT
  341.      will automatically change to the drive specifier for you.
  342.      Thus, assigning "A:" to F10 provides a single keystroke method
  343.      of logging on to drive A any time the F10 key is pressed.
  344.  
  345.      Main menu item E lets you assign printer codes that can be sent
  346.      to the printer from a menu in SCOUT.  It is highly recommended
  347.      that unless you have and Epson FX-80/85 and are satisfied with
  348.      the default settings, that you have your printer user's manual
  349.      handy when you enter the desire codes. Codes can be assigned to
  350.      function keys F2 thru F9.  F1 is reserved as a means of
  351.      initializing any parallel printer and F10 is used to send a
  352.      test string to the printer.  Codes are entered in DECIMAL.
  353.      Suppose you wish to assign the code that places your printer in
  354.      the letter quality mode.  Your printer manual tells you that
  355.      sending the DECIMAL sequence 27, 120, and 1 will place the
  356.      printer in the letter quality mode.  Select the function key
  357.      you wish to assign this code to and press it.  You will be
  358.      first be prompted to enter a descriptive name (10 characters
  359.      maximum) for the code sequence.  In this case you might enter
  360.      "LTR QUAL".  Next, you are prompted for the code sequence.
  361.      Enter the decimal numbers (five maximum) as follows:
  362.  
  363.                          27/120/01
  364.  
  365.      In this manner you can set up SCOUT to configure your printer
  366.      directly from an application program.
  367.  
  368.      Item F on the main menu permits you to assign a default sort
  369.      that SCOUT will use each time it is activated.  Six choices
  370.      are available:
  371.  
  372.                     [A]  Sort by file name
  373.                     [B]  Sort by file extension
  374.                     [C]  Sort by file date
  375.                     [D]  Sort by file size
  376.                     [E]  Sort by file name/extension
  377.                     [F]  ASCENDING
  378.  
  379.      SCOUT will employ whichever sort you select as a default, but
  380.      the sorting method can be changed on the fly when SCOUT is
  381.      active.  The last choice is a nested sort that first sorts by
  382.      file name and then sorts by extension within the filename
  383.      groups so that files with common names will be listed in
  384.      alphabetical order of their extensions.  In addition to selecting
  385.      the type of sort desired, the default sort direction can be
  386.      toggled with item F on the menu.  Each time the key is pressed
  387.      the direction indicator changes from ASCENDING to DESCENDING or
  388.      vice versa.
  389.  
  390.      Menu item G provides a rather unique capability.  When a file
  391.      is copied by DOS, the new file is given the same date/time
  392.      stamp as the copied file.  If desired, SCOUT will update the
  393.      date/time of a new copy of a file to the current date and time.
  394.      This feature can be toggled on or off as desired.
  395.  
  396.      Item H on the menu provides the facility for setting up
  397.      parameters for printing text files.  The following default
  398.      parameters can be set from this menu:
  399.  
  400.                      [L]  Left margin
  401.                      [T]  Top margin
  402.                      [B]  Bottom margin
  403.                      [P]  Lines per page
  404.                      [N]  Page numbering
  405.                      [D]  Today's date
  406.  
  407.      The lines per page needs some explaining.  Normally, this would
  408.      be set to 66 but if it is desired to set the printer to print
  409.      88 lines per page, then this parameter must be set in
  410.      synchronization in order for SCOUT to page probably.  These are
  411.      default settings and are quickly reset on the fly from SCOUT,
  412.      so 66 would be the most appropriate setting.  Page numbering is
  413.      a toggle that sets the default to on or off as desired.  If set
  414.      to on, SCOUT will place a page number at the bottom of each
  415.      printed page when printing a file using the SCOUT format
  416.      settings.  Today's date is also a toggle that if turned on will
  417.      place a one line header containing the current date at the top
  418.      of the first printed page.
  419.  
  420.      Main Menu item I permits setting up a menu of the most commonly
  421.      used programs that will be executed from SCOUT.  There are
  422.      three elements to respond to for each of the 10 menu items
  423.      (associated with function keys).  The first is the full program
  424.      name such as ZAPCIS.EXE.  The second is the path name where the
  425.      program file is located.  This is a full DOS path name that
  426.      may include the drive specifier.  An example is C:\COMMUTIL. If
  427.      the drive specifier (e.g., C:) is omitted, SCOUT will use the
  428.      currently active drive.  The third element is whether you
  429.      desire to be prompted for a command line entry before executing
  430.      the program.  Some programs accept command line entries such as
  431.      the following:
  432.  
  433.                           QEDIT myfile.txt
  434.  
  435.      Where QEDIT loads and reads the file myfile.txt.  If you desire
  436.      to be prompted for a command line entry for a specific program,
  437.      SCOUT will flag that item on the menu with an asterisk ("*")
  438.      and any time you press that associated function key from the
  439.      program menu, SCOUT will stop and prompt you for an entry
  440.      before executing the program.  Then the program will be
  441.      executed just as if you had typed the entire string from the
  442.      DOS command line.
  443.  
  444.      Item J on the main menu permits enabling or disabling the prime
  445.      key as a means of calling SCOUT.  This key is so rarely used
  446.      that it is an ideal one-key alternative to the dual keystroke
  447.      combination.  The prime key must be enabled if you plan to
  448.      disable the main dual keystroke combination on the fly from
  449.      within SCOUT.
  450.  
  451.      Item K toggles a flag in SCOUT that determines whether or not
  452.      SCOUT will pause during the video retrace cycle to avoid "snow"
  453.      on older CGA monitors.  Monochrome, EGA, and VGA monitors do
  454.      not require snow avoidance checking.
  455.  
  456.      Item L will bring up the floppy drive parameter table that SCOUT
  457.      utilizes for formatting floppy disks.  Up to four system floppy
  458.      drives may be configured for formatting.  It is important here to
  459.      note that the DOS drive designators, which are alphabetic characters,
  460.      may not necessarily be in a sequence corresponding to the BIOS
  461.      drive designators, which fall between 0 and 3.  BIOS drive 0 is
  462.      always DOS drive A, BIOS drive 1 may not be drive B, especially if
  463.      the second floppy drive is an add-on.  In that case, your driver
  464.      might call the drive D or E.
  465.  
  466.                        SCOUT Floppy Drive Table Setting                        
  467.                                                                                
  468.     0 - A   5 1/2"  DUAL density                                               
  469.     1 - B   5 1/2"  DUAL density                                               
  470.     2 - C   5 1/2"  SINGLE density                                             
  471.     3 - D   5 1/2"  SINGLE density                                             
  472.                                                                                
  473.     Press drive number to change or ESC to quit:                               
  474.     Enter DOS drive letter:                                                    
  475.     Press <5> for 5 1/4", <3> for 3 1/2" drive:                                
  476.     <D>ual or <S>ingle density?                                                
  477.                                                                                
  478.     It is important to set the BIOS drive number with the corresponding
  479.     DOS drive designator.  Also note that DUAL DENSITY actually means
  480.     High Capacity, i.e., a 1.2M or a 1.4M drive.  If the drive does not
  481.     support two formats, then select Single Density.
  482.  
  483.      Upon completion of establishing your SCOUT configuration, press
  484.      the Esc key from the main menu.  You will be asked if you wish
  485.      to make all changes permanent.  If the answer is affirmative,
  486.      SCOUT.COM will be modified accordingly and all the changes made
  487.      during this session will be active the next time SCOUT is
  488.      loaded.  If a Color Graphics Adaptor (CGA) and color monitor
  489.      are active, you will be asked if your monitor "flickers".
  490.      SCOUT writes directly to the video screen and some CGA boards
  491.      will display snow or sparkle whenever the screen is updated.
  492.      Other boards are impervious to this.  Answering no will result
  493.      in faster display updates but might cause sparkle and snow on
  494.      certain monitors.  If you're not sure, try it both ways and
  495.      then configure SCOUT as desired.
  496.  
  497.      III.  LOADING SCOUT
  498.  
  499.      Like any other executable program, SCOUT.COM can be loaded
  500.      directly from the DOS command line or from a batch file.  Many
  501.      PC users have several other memory resident utilities that are
  502.      loaded each time the system is booted.  SCOUT is well-behaved
  503.      and should work in conjunction with most Terminate and Stay
  504.      Resident (TSR) software.  For example, in the case of Borland's
  505.      Sidekick, it is recommended that SCOUT be loaded prior to
  506.      Sidekick.  In that configuration, Sidekick can be called when
  507.      SCOUT is active and SCOUT can be called when Sidekick is
  508.      active.  In case of conflicts with other TSR's, experimentation
  509.      with the order the TSR's are loaded will usually solve the
  510.      problem.
  511.  
  512.      SCOUT provides a way to adjust the amount of Random Access
  513.      Memory (RAM) it occupies.  As delivered, SCOUT is set to
  514.      support up to 250 files per directory up to 50 directories
  515.      per drive.  Naturally, there must be enough RAM available to
  516.      contain the data associated with each file and each directory.
  517.      But if your system is such that you don't require support for
  518.      250 files/directory and 50 directories, these parameters can
  519.      be adjusted downward to conserve RAM.  For example, suppose you
  520.      decide that 200 files/directory and 25 directories are
  521.      sufficient for your system.  Just place the number for the
  522.      maximum number of files and the number for the maximum number
  523.      of directories on the command line when loading scout as
  524.      follows:
  525.  
  526.                         SCOUT f200 d25
  527.  
  528.      Be sure to place an "f" immediately in front of the desired
  529.      value for maximum files and a "d" (upper or lower case) in
  530.      front of the directories value.  Since SCOUT uses 23 bytes for
  531.      each file and 39 bytes for each directory, a memory savings of
  532.      (200 * 23) + (25 * 39) = 5575 bytes will be realized.  Just
  533.      remember that, in this case, if SCOUT is displaying a directory
  534.      with more than 200 files, you will only see the first 200 files
  535.      found by SCOUT when it is called up.  And similarly, if SCOUT
  536.      is called while logged onto a disk with more than the specified
  537.      25 directories, the catalog will only show the first 25
  538.      directories located.  
  539.      
  540.      If you require that SCOUT support more than 250 files or more than
  541.      50 directories, you can increase the number in the same way as
  542.      described above.  For example, suppose you need to view up to 750
  543.      files per directory and that you have 125 directories on a single
  544.      drive.  Load SCOUT as follows:
  545.  
  546.                         SCOUT f750 d125
  547.  
  548.      Just remember that SCOUT will use 23 bytes of RAM per file and 39
  549.      bytes per directory.
  550.  
  551.      When attempting to execute a program from SCOUT, a check is made to
  552.      see if SCOUT has been called from the DOS level.  If not, an error
  553.      message box is displayed and the program is not executed.  If your
  554.      system causes this to occur even though you have called SCOUT from
  555.      the DOS command level, you may disable the check by loading SCOUT
  556.      with an 'X' (or 'x') on the command line following the files and
  557.      directory limits (if used).
  558.  
  559.      Another means of saving memory is afforded to owners of Hercules 
  560.      (and compatible) Graphics Cards (HGC).  Entering a single "h" 
  561.      anywhere on the command line will  cause SCOUT to use some of the 
  562.      abundant HGC memory for storage of file and saved screen data.  
  563.      This will result in saving a not so trivial 15.6k of RAM.  
  564.      Two caveats are in order here.  The first is that this will not 
  565.      work with Hercules Plus cards while a Hercules ramfont is loaded.  
  566.      The second is that some so-called Hercules compatible boards are not 
  567.      really so compatible and may cause SCOUT to behave strangely.
  568.  
  569.      Color users also may be able to significantly reduce SCOUT's
  570.      image in RAM if they own an advance technology CGA that doesn't
  571.      show flicker or snow.  Entering a single "U" on the command line
  572.      will also save 15.6 k of RAM.  Color users get a bonus in RAM
  573.      saved because SCOUT is able to use some of the available board
  574.      memory for storage of screens saved.
  575.  
  576.      SCOUT uses a buffer for operations such as file copying, text
  577.      file viewing, etc.  The size of this buffer is normally 4096
  578.      bytes, but it may be increased up to a maximum of 12,228 bytes.
  579.      The only practical reason for doing so is to increase the speed
  580.      at which SCOUT copies files.  Using the default of 4096 bytes,
  581.      SCOUT copies just about the same speed as DOS.  If desired, set
  582.      the file buffer size by entering a "b" followed by any number
  583.      between 2048 and 12228 as a parameter on the command line when
  584.      loading SCOUT as follows:
  585.  
  586.                       SCOUT b8192
  587.  
  588.      By the way, maximum copying efficiency will be realized if the
  589.      buffer size is set to a multiple of 512 bytes.
  590.  
  591.      Entering a "C" anywhere on the command line will enable SCOUT's
  592.      CRC checking during file copying.
  593.  
  594.      In summary, SCOUT can be configured on the fly by entering
  595.      values for maximum files, maximum directories, and buffer size
  596.      on the command line.  Here are some examples of how SCOUT can
  597.      be loaded:
  598.  
  599.      SCOUT f150 d20         150 files, 20 directories, 4096 buffer
  600.      SCOUT d40 f200 b8192   200 files, 40 directories, 8192 buffer
  601.      SCOUT b6000 d175       175 files, 100 directories, 6000 buffer
  602.      SCOUT                  250 files, 50 directories, 4096 buffer
  603.  
  604.      IV. SCOUT HELP (^H or Backspace key)
  605.  
  606.      Once loaded, SCOUT can be called from anywhere.  Just press the
  607.      defined hot key combination or the prime key (if not disabled)
  608.      and SCOUT will pop up, saving the screen that was present when
  609.      it was activated.  To return to normal operations just press
  610.      the Esc key and the SCOUT main display will be replaced by the
  611.      screen that was present when SCOUT was called.  A two page help
  612.      display may be activated from the main SCOUT display by
  613.      pressing either ^H or the backspace key.  This display contains
  614.      a list of all available SCOUT command keys and short
  615.      descriptions of what each key accomplishes.  The two pages of
  616.      the help display are toggled back and forth by pressing any
  617.      key.  Remove the help display by pressing the Esc key.
  618.  
  619.      V. THE SCOUT DIRECTORY CATALOG (Z or B)
  620.  
  621.      SCOUT maintains a directory catalog for each disk on which it
  622.      is used.  The catalog is kept in a file name SCOUT.LOG located
  623.      in the root directory of each drive execept floppy drives A and
  624.      B (these are dynamically stored in memory).  When SCOUT
  625.      initially logs onto a drive it will check to see if SCOUT.LOG
  626.      exists in the root directory of that drive.  If so, it reads
  627.      the catalog.  If not, it scans the drive, locates all
  628.      directories, creates SCOUT.LOG, and stores the directory names
  629.      in this file.  Any time a new directory is created or a
  630.      directory is deleted through SCOUT commands, the catalog file
  631.      is updated.  But if the user deletes or creates a directory
  632.      outside of SCOUT, the catalog will not be accurate.  For this
  633.      reason there is a SCOUT command that will scan the current disk
  634.      and update the catalog.  Press "s" with the main SCOUT display
  635.      up and SCOUT will scan all disks in the sytem except floppy 
  636.      disks.  Drives will be scanned in the order of the highest
  637.      to the lowest DOS letter designator.  Using a catalog file 
  638.      strategy greatly speeds up searches for files and permits very 
  639.      rapid verification of a user entered directory name.
  640.  
  641.      VI.  THE MAIN SCOUT DISPLAY (Hot key)
  642.  
  643.      The main SCOUT display contains a wealth of information.  The
  644.      top line of the display shows the date and time in a very
  645.      readable format followed by the version of DOS in use.  The
  646.      main part of the display is divided into 5 columns that hold up
  647.      to 14 file names each.  Thus, up to 80 file names can be
  648.      displayed at one time.  If there are more than 80 files in the
  649.      current directory, the PgUp and PgDn keys can be used to
  650.      display the different pages (up to a maximum of 5).
  651.  
  652.      Initially, a solid cursor bar appears that is highlighting the
  653.      first file displayed.  File names are displayed in the order
  654.      determined by the current sort method.  The cursor can be moved
  655.      with the up, down, right, and left arrow keys.  The solid bar
  656.      under the file display shows the current directory path name.
  657.      Below that, there are three blocks of information.  Other keys 
  658.      that control the cursor are:
  659.  
  660.                  Tab Key    -  Toggles between moving the
  661.                                cursor to the top of the
  662.                                current column and the bottom
  663.                                of the current column.
  664.  
  665.                  "." or "," -  Think of them as the ">" and
  666.                                "<" keys.  "<" moves the cursor
  667.                                to the first file on the page and
  668.                                ">" move to the last file on the
  669.                                page.
  670.  
  671.      The first block on the left displays information about the file
  672.      or directory name currently being highlighted by the cursor
  673.      bar.  An example is:
  674.  
  675.                  Date: 16 December 1986
  676.                  Time: 01:00 p.m.
  677.                  Size: 15,172
  678.                  Attr: Normal-A
  679.  
  680.      The date and time entries are self-explanatory.  The size entry
  681.      is from the DOS report of the actual file size to the byte.
  682.      This will be a zero if the entry being highlighted is a
  683.      directory or volume label.  The attribute entry shows status of
  684.      the file attribute byte.  In this case the file is a normal
  685.      file that has the archive bit set.  More about attribute bytes
  686.      will be explained later.  Attribute status may be any of the
  687.      following:
  688.  
  689.                    Normal
  690.                    Read-only
  691.                    Hidden
  692.                    System
  693.                    Read-only & Hidden
  694.                    Read-only & System
  695.                    Hidden & System
  696.                    Read-only & System & Hidden
  697.  
  698.      Names of hidden files will appear on a monochrome monitor in
  699.      low intensity video and underlined.  In a color system, they
  700.      appear as a bright cyan.  Directory names in a mono system are
  701.      in low intensity video and have arrow heads appended at each
  702.      end of the entry.  In color, they are yellow.  Volume labels
  703.      appear in low intensity with vertical bars at each end in a
  704.      mono system and are light red in a color system.
  705.  
  706.      The middle box of the lower part of the main display shows the
  707.      following information:
  708.  
  709.                   Disk = MYDISK-1
  710.                   Mask = *.*
  711.                   Files tagged = 0
  712.                   Bytes tagged = 0
  713.  
  714.      The first line shows the name (if any) of the current disk.  It
  715.      will appear as NOT LABELED if that is the case.  The next line
  716.      shows the current file mask.  The file mask consists of a valid
  717.      DOS file name that may contain DOS wild card characters
  718.      ("*","?").  All displayed entries will match this mask.  The
  719.      last two lines are used for information when batch tagging
  720.      files, which will be discussed later.
  721.  
  722.      The box on the far right of the lower part of the main display
  723.      contains more information on the current directory.  It
  724.      displays:
  725.  
  726.                    Dirs  =          2
  727.                    Files =        134
  728.                    Used  =  1,024,000
  729.                    Free  =  7,665,424
  730.  
  731.      Dirs refers to the number of subdirectory contained in this
  732.      directory.  Files is the number of files in the current
  733.      directory, based upon the file mask.  If the file mask is "*.*"
  734.      then all files in the directory will be displayed.  Used is the
  735.      total sum number of bytes occupied by files matching the
  736.      current file mask.  Free is the number of bytes currently
  737.      available for DOS assignment on the active drive.
  738.      The bottom line shows the SCOUT default directory, which is the
  739.      directory active at the time SCOUT is called.
  740.  
  741.      VII.  SCOUT NAVIGATION COMMANDS
  742.  
  743.      SCOUT provides a number of commands that facilitate navigation
  744.      around the system.  Each is invoked from the main SCOUT
  745.      display and is described in the following subparagraphs.
  746.  
  747.           A.  Changing drives. (D)
  748.  
  749.               Pressing the "d" key will pop up a small window that
  750.               prompts for entry of a single character that denotes
  751.               the desired drive.  In DOS, drives are designated by
  752.               A,B,C... etc.  Pressing the appropriate letter key
  753.               will cause SCOUT to change to the drive indicated and
  754.               display whatever the default directory on that drive
  755.               happens to be.  If a letter is pressed that is outside
  756.               the range of drives in the system or if the target
  757.               drive is not ready (i.e., door is open), then an error
  758.               window will be displayed.  A drive change may also be
  759.               effected by assigning one of the function keys to a
  760.               string such as "A:" and then pressing that function
  761.               key.
  762.  
  763.           B.  Changing the SCOUT base or default directory. (B)
  764.  
  765.               When initially called, SCOUT will record the current
  766.               drive and active directory as the default directory.
  767.               This is done so that SCOUT will not trick the current
  768.               application program by changing drives and/or
  769.               directories.  This can be changed by pressing the "b"
  770.               key.  The SCOUT directory catalog will appear and the
  771.               SCOUT default directory can be changed to any
  772.               directory in the catalog by pressing the associated
  773.               letter key.  The catalog is divided into pages of 20
  774.               directories each and the directory names are
  775.               alphabetically sorted.  Page through the catalog by
  776.               using the PgUp and PgDn keys.  Note that the SCOUT
  777.               default directory is always displayed on the bottom
  778.               line of the main SCOUT display.  The End key will
  779.               effect a change to the SCOUT default directory.
  780.  
  781.           C.  Changing to a Directory. (Z or F-key or CR)
  782.  
  783.               A change of directory can be accomplished by moving
  784.               the cursor over the name of a subdirectory and
  785.               pressing return.  A directory change can also be
  786.               accomplished in several other ways.  One is through
  787.               the SCOUT catalog (described later) and the other is
  788.               through the function keys.  Recall that function keys
  789.               could be assigned valid directory path names via the
  790.               configuration program (CONFIG.COM).  Simply pressing a
  791.               function key assigned a directory name will cause
  792.               SCOUT to change to that directory and display it's
  793.               files.  Pressing the Home key will change to the root
  794.               directory of the current drive and pressing the End
  795.               key will change to the SCOUT default directory.
  796.               Pressing Ctrl and PgUp will change to the parent
  797.               directory of the current directory.  For example, if
  798.               SCOUT is displaying files in \ONE\TWO\THREE and the
  799.               Ctrl PgUp combination is pressed, SCOUT will change to
  800.               and display files in \ONE\TWO.
  801.  
  802.      VIII.  SCOUT DIRECTORY COMMANDS
  803.  
  804.      A number of various commands are available that make it much
  805.      easier to manage the directory structure of a large disk.
  806.  
  807.           A.  Creating a directory. (I)
  808.  
  809.               Pressing the "i" key will bring up a window that
  810.               prompts for the name of the directory you wish to
  811.               create.  If you desire that the directory you are
  812.               creating become a subdirectory of the current
  813.               directory, then type in a valid DOS name with NO PATH
  814.               SPECIFIER.  For example, suppose SCOUT is displaying
  815.               the files in C:\ONE and you wish to create the
  816.               subdirectory C:\ONE\TEST, which is a child of the
  817.               directory \ONE.  Type TEST, press return, and SCOUT
  818.               will create the directory and update the catalog.
  819.               When the screen is refreshed, the new directory name
  820.               will appear on the display.  If you desire to create a
  821.               directory that is NOT a child of the current
  822.               directory, then type in the full DOS path name of the
  823.               new directory.  For example, suppose you wish to
  824.               create the directory \ABC.  Type in the string
  825.               "\ABC", press return, and SCOUT will create the
  826.               directory "\ABC".
  827.  
  828.               Note that any time an invalid path specifier is
  829.               entered, SCOUT will display an error box with the
  830.               message "Invalid Directory".  This might occur if an
  831.               attempt is made to create a directory with a name that
  832.               is already in use as a directory name.
  833.  
  834.           B.  Removing a Directory. (Del)
  835.  
  836.               A directory is deleted by changing to the parent
  837.               directory of the directory to be removed, placing the
  838.               cursor bar over its name, and pressing the Del key.
  839.               If the directory contains files it cannot be deleted
  840.               and SCOUT will notify you by showing the error box and
  841.               the message "Directory has files."
  842.  
  843.           C.  Directory Listing. (^P)
  844.  
  845.               A printed copy of the current directory file list may
  846.               be obtained by pressing the combination of Ctrl P from
  847.               the main SCOUT display.  A window will pop up offering
  848.               two choices.  A listing of only the current directory
  849.               or a listing of all directories on the current drive
  850.               may be selected.  If your printer is not ready, an
  851.               error box will pop up informing you of this fact.
  852.  
  853.           D.  Volume Labels.  (L)
  854.  
  855.               SCOUT permits the creation, renaming, and deletion of
  856.               disk volume labels.  A label may be created by
  857.               pressing the "l" key.  If no label exists, you will be
  858.               prompted for the new label name.  Be sure to enter a
  859.               valid DOS name.  If a label already exists, an error
  860.               box will pop up so informing you.  To rename or remove
  861.               a label, move SCOUT to the root directory of the
  862.               desired drive and place the cursor over the current
  863.               label.  To rename it, press the Ins key.  To remove
  864.               it, press the Del key.  If renaming a label, you will
  865.               be prompted for the new label name.  If deleting a
  866.               label, the label name under the cursor bar will be
  867.               replaced by the string "[ DELETED ]".
  868.  
  869.           E.  Refreshing the Main Display. (X)
  870.  
  871.               As you will see later, it is sometimes desirable to
  872.               update the SCOUT display.  Pressing the "x" key will
  873.               refresh the display and move the display to the first
  874.               page of files.
  875.  
  876.      IX.  FILE OPERATIONS
  877.  
  878.      The following subparagraphs describe SCOUT's ability to manage
  879.      the files on your disks.
  880.  
  881.           A.  Copy a File. (C)
  882.  
  883.               To copy an individual file, use the arrow keys to move
  884.               the cursor to the file name you wish to copy and press
  885.               the "c" key.  SCOUT will respond with a window that
  886.               prompts you for the new file name.  This can be a
  887.               simple file name, in which case SCOUT will copy file
  888.               under the cursor to a file of the name you entered in
  889.               the same directory, or it can be a path name, in which
  890.               case SCOUT will make a copy of the file of the same
  891.               or new name in the directory specified.  In any case,
  892.               SCOUT will show you the full path name (including the
  893.               target file name) and ask for permission to proceed
  894.               with the copy.  If no path name is shown, then it
  895.               indicates that SCOUT intends to copy the source file
  896.               to the target file in the current directory.  SCOUT
  897.               makes several checks to insure that it doesn't attempt
  898.               to copy a file to itself and will bring up the error
  899.               box if that is the case.  Upon completion of the copy
  900.               operation, SCOUT will display the number of bytes
  901.               actually copied.
  902.  
  903.               When copying to another drive, SCOUT will invoke the
  904.               error box if it detects that the target drive is write
  905.               protected or that the it is not ready (open door).  It
  906.               will also check the validity of the target
  907.               directory, if one is specified, and abort the copy if
  908.               the target directory path is not valid.
  909.  
  910.               If CRC checking is enabled, SCOUT will compute a CRC value
  911.               for the source file during the copying process.  When the
  912.               copying is complete, SCOUT will read the data from the
  913.               destination file back through the file buffer and compute
  914.               a second CRC value.  These two values are then compared
  915.               and if they are not equal, then the two files differ by at
  916.               least one bit of data.  CRC can be enabled/disabled by
  917.               pressing ^C from the main menu.  The default is OFF at
  918.               load time but this can be changed by placing a C (or c) on
  919.               the command line at runtime (i.e., SCOUT c).
  920.  
  921.           B.  Strip and Copy a File. (^S)
  922.  
  923.               This function (^S) will copy a file in the exact same
  924.               manner as described above except that it will strip
  925.               the high bit from all characters as it copies.  In
  926.               other words, Wordstar files may be copied in a way
  927.               that removes special control codes and characters.
  928.               The resulting copy will be a straight ASCII file.
  929.  
  930.           C.  Move a File. (V)
  931.  
  932.               SCOUT will move a file from one directory to another
  933.               on the same drive.  It will not move files across
  934.               drives.  Highlight the target file with the cursor and
  935.               press the "v" key.  A window will open that prompts
  936.               for the path name of the destination directory.
  937.               Entery the desired directory path name and press
  938.               return.  If the entered destination path name is
  939.               valid, SCOUT will move the file from the current
  940.               directory to the destination directory.  If the path
  941.               name was not valid, an error box will appear.  When
  942.               the move window disappears, the name [ MOVED ] will
  943.               appear in the place of the target file name.
  944.  
  945.               Moving a file from on directory to another is faster
  946.               than copying it because no data is actually moved.
  947.               Instead, the target file name is moved from its
  948.               original directory to the new directory.
  949.  
  950.           D.  Rename a File. (Ins)
  951.  
  952.               A file can be renamed by moving the cursor over the
  953.               file name and pressing the Ins key.  A window will
  954.               appear that prompts for the new file name.  Enter any
  955.               valid DOS name and press enter.  The name of the file
  956.               will be changed to the newly entered name.  It is
  957.               permissable to use the "*" wild card when renaming a
  958.               file.  For example, suppose you desire to rename the
  959.               file named LONGFILE.TXT to LONGFILE.DAT.  When
  960.               prompted for the new name, enter *.DAT and SCOUT will
  961.               rename LONGFILE.TXT to LONGFILE.DAT.
  962.  
  963.           E.  Alter a File Attribute. (A)
  964.  
  965.               Each file created and maintained by DOS has what is
  966.               called an attribute byte.  This byte contains coding
  967.               information that describes certain of the file's
  968.               properties.  It is through coding of the attribute
  969.               byte that a file is marked as hidden, read-only, or
  970.               archived.  In the case of archive status, each time a
  971.               file is opened for updating, DOS sets the archive bit
  972.               (a member of the attribute byte) to indicate that the
  973.               file has been updated.  Many back-up programs re-set
  974.               the arhive bit to show that the file has been backed
  975.               up and hasn't been changed since.  The attribute byte
  976.               of any file on your disk can be altered by SCOUT by
  977.               highlighting the target file with the cursor and
  978.               pressing the "a" key.  A menu type window will appear
  979.               that allows you set the file's attribute to any of the
  980.               DOS legal settings.  This is useful for deleting files
  981.               marked read-only by some applications programs.  First
  982.               change the attribute to normal and then the file may
  983.               be safely deleted.  Neither DOS nor SCOUT will delete
  984.               a file marked as read-only, so it is one method of
  985.               protecting valuable file from inadvertant erasure.
  986.  
  987.           F.  Delete a File. (Del)
  988.  
  989.               To delete a file, move the cursor over the target file
  990.               and press the Del key.  If the file is marked as read-
  991.               only, an error box will appear and SCOUT will not
  992.               delete the file.  SCOUT will ask if you are sure that
  993.               you wish to delete the file.  If you are sure, press
  994.               the "y" key and SCOUT will delete the file.  If not,
  995.               press any other key and the window will disappear and
  996.               the file will remain as before.
  997.  
  998.               If you attempt to delete a file on a write-protected
  999.               drive, SCOUT will inform you with an error box.
  1000.  
  1001.           G.  Purging a Directory of Files. (Left Shift + Tab)
  1002.  
  1003.               SCOUT offers a fast way of purging (deleting) all the
  1004.               files in a directory.  Move SCOUT to the desired
  1005.               directory and press the left-shift tab key
  1006.               combination.  A window will appear that asks if you
  1007.               are ABSOLUTELY CERTAIN.  Be careful, because answering
  1008.               to the affirmative will delete ALL files in the active
  1009.               directory.  All files, that is, except any marked as
  1010.               read-only (of course).
  1011.  
  1012.           H.  Setting a File Time/Date. (^F)
  1013.  
  1014.               A file's time and/or date may be changed by moving the
  1015.               cursor bar over the name of the file and pressing the
  1016.               Ctrl "f" combination.  A window will appear that
  1017.               offers three choices.  A new time may be entered, a
  1018.               new date may be entered, or the file's time/date can
  1019.               be set to the current system time/date.  The date is
  1020.               entered in the format MM-DD-YY.  Be sure to enter two
  1021.               digits each for the month, day, and year fields.  The
  1022.               separator between fields may be the hyphen (-) or any
  1023.               character desired.  The time is similarly entered
  1024.               using the format HH:MM:SS.  The seperator may be the
  1025.               colon or any desired character.  An error message will
  1026.               inform you if you enter an invalid time or date.  The
  1027.               file's time and date may both be updated to system
  1028.               time automatically by selecting that choice from the
  1029.               window menu.
  1030.  
  1031.           I.  Printing a File. (^Z)
  1032.  
  1033.               If the printer is ready and available, pressing Ctrl
  1034.               "z' with the cursor highlighting a printable file (not
  1035.               a .COM or .EXE file) will bring up the SCOUT print
  1036.               menu.  If the printer is not ready, an error box will
  1037.               appear informing you of that fact.  Three choices are
  1038.               available.  The file can be printed using SCOUT
  1039.               formatting parameters or it can be printed with no
  1040.               added formatting.  The third window menu choice leads
  1041.               to an auxilliary menu that allows you to set the
  1042.               printing parameters.  If you know that the file you
  1043.               wish to print already contains form-feeds and other
  1044.               printer control codes, then use menu item B to print
  1045.               the file.
  1046.  
  1047.               If you desire to use SCOUT formatting commands, you
  1048.               may change the parameters you defined via the
  1049.               configuration program from the auxilliary menu.  It
  1050.               looks like this:
  1051.  
  1052.                      [L]  Left margin          0
  1053.                      [T]  Top margin           0
  1054.                      [B]  Bottom margin       10
  1055.                      [P]  Lines per page      66
  1056.                      [N]  Page numbering      NO
  1057.                      [D]  Today's date        YES
  1058.                      [S]  Start page           1
  1059.                      [E]  End page            99
  1060.  
  1061.               The page numbering and date selections are toggle that
  1062.               will change from YES to NO (or NO to YES) each time
  1063.               the associated key is pressed.  All other selections
  1064.               result in a prompt for the desired values.  The start
  1065.               and end page settings permit you to print a selected
  1066.               portion of a document.  If the start and end page
  1067.               values are set so that the start page is greater than
  1068.               the end page, SCOUT will "simulate" printing the file
  1069.               and you can discover the number of lines and pages in
  1070.               a file based upon the type of formatting selected.
  1071.               Note that the Left margin parameter is in effect even
  1072.               when a file is printed with no SCOUT formatting.  This
  1073.               was done so that you might have some control over the
  1074.               left margin of a document even though it it pre-
  1075.               formatted.
  1076.  
  1077.               After selection of print parameters is complete, press
  1078.               the Esc key to return to the main print menu and
  1079.               select the type of formatting desire.  SCOUT will then
  1080.               cause the file to be printed and will keep you
  1081.               informed of its progress by dynamically updating the
  1082.               number of lines and pages printed as well as the per
  1083.               cent of completion.
  1084.  
  1085.      X.  SCOUT BATCH FILE OPERATIONS
  1086.  
  1087.      Batch file operations make quick, easy work out dealing with
  1088.      the requirement to move, copy, or delete a group of files.  It
  1089.      saves many, many keystrokes and lowers the possibility of
  1090.      inadvertant errors caused by mistyping.
  1091.  
  1092.           A.  Tagging Files.
  1093.  
  1094.               The purpose of tagging files is mark a selected group
  1095.               of files for moving, copying, or deleting.  Files are
  1096.               tagged by using the plus (+) key.  When the plus key
  1097.               is pressed, a "+" symbol appears next to the file name
  1098.               under the cursor and the cursor advances to the next
  1099.               file name.  Up to 80 files may be tagged at one time.
  1100.               An individual file may be tagged by moving the cursor
  1101.               to that file and pressing the minus key.  As files are
  1102.               tagged, the lower center and right information boxes
  1103.               are updated.  A running tally of the number of files
  1104.               tagged and bytes tagged is kept in the center lower
  1105.               box.  The last line of the lower right box changes to
  1106.               "Flex = ".  This provides the user with a running
  1107.               tally of bytes tagged based on the cluster size of a
  1108.               floppy disk.  For a more technical explanation, see
  1109.               the technical notes section of this manual.
  1110.  
  1111.               Files may also be tagged automatically by pressing the
  1112.               Ctrl "t" combination.  Auto tagging will commence at
  1113.               the current location of the cursor and tag all files
  1114.               until the 80th file or the end of the listed files is
  1115.               reached.  This operation can span SCOUT's directory
  1116.               pages.
  1117.  
  1118.               Another method of automatically tagging files is to
  1119.               press the Ctrl "w" combination.  A window will appear
  1120.               that prompts for entry of a file mask.  When the file
  1121.               mask is entered (e.g., "AB??DC.*LM"), SCOUT will tag
  1122.               all files matching the mask specification up to 80
  1123.               files or the end of the listed files.
  1124.  
  1125.               A tagged file may be untagged by moving the cursor to
  1126.               it and pressing the minus "-" key.  All tagged files
  1127.               can be untagged with just one keypress.  Press the "u"
  1128.               key and SCOUT will remove all active tags.
  1129.  
  1130.               Any batch operation may be aborted at any time by pressing
  1131.               the ESC key.
  1132.  
  1133.           B.  Batch Copying. (G)
  1134.  
  1135.               All tagged files may be copied in one operation by
  1136.               pressing the "g" key.  A window will appear that shows
  1137.               the names of all tagged files and asking for a
  1138.               destination.  If no files are tagged, a message to
  1139.               that effect appears in the window.  Entry of a valid
  1140.               destination string will cause all the tagged files to
  1141.               be copied to that destination.  The destination string
  1142.               can be a directory on the current drive, a directory
  1143.               on a different drive, or the default directory of a
  1144.               different drive.  To copy to the default directory of
  1145.               another drive, just enter the drive designator and a
  1146.               colon (i.e., "A:") and SCOUT will do the rest.  To
  1147.               minimize entry errors resulting in copying to the
  1148.               wrong destination, SCOUT responds to entry of the
  1149.               destination string by displaying the intended
  1150.               destination in full DOS path name format and
  1151.               requesting confirmation for the copy.  Pressing Esc at
  1152.               any time during this operation will abort the copy.
  1153.  
  1154.               As each file is copied, the string [ COPIED ] replaces
  1155.               the file name on the displayed list of tagged files.
  1156.               Upon completion of the batch copy operation, SCOUT
  1157.               will display the total number of bytes copied.  If CRC
  1158.               checking is enabled, SCOUT will conduct a read/write CRC
  1159.               check on each file as it is copied.  If the CRC check is
  1160.               passed, SCOUT will display the string [ CHECKED ] instead
  1161.               of [ COPIED  ].  If the CRC check failes, the string
  1162.               [  FAILED  ] will be displayed.
  1163.  
  1164.               When copying to another drive, SCOUT will abort the
  1165.               copying function if the space available on the target
  1166.               drive is exceeded.  An error box will pop informing
  1167.               you that the copying was aborted due to lack of space.
  1168.  
  1169.               At the completion of the batch copy operation, all
  1170.               tagged files will now have a pound sign ("#") in place
  1171.               of the plus ("+") sign.  Pressing the "t" key at this
  1172.               point will result in re-tagging all the files just
  1173.               copied.  This saves having to manually tag those files
  1174.               again in case it is desire to copy the same group of
  1175.               files to several different destinations.
  1176.  
  1177.           C.  Batch Moving. (M)
  1178.  
  1179.               The batch move operation operates exactly as the batch
  1180.               copy operation except that files may not be moved to
  1181.               another drive.  Again, window appears that displays
  1182.               all tagged file names and prompt for the destination
  1183.               directory.  If the entered directory name is invalid,
  1184.               an error box will appear informing you of that fact.
  1185.               As each file is moved, the string [  MOVED  ] replaces
  1186.               the moved file.  If the destination directory contains
  1187.               any files with the same name as one of those tagged,
  1188.               the [  MOVED  ] indicator will not replace the name
  1189.               and at the end of the operation an error box will
  1190.               inform you of the error.  At the end of the
  1191.               operation, SCOUT will display the total number of
  1192.               bytes moved.
  1193.  
  1194.           D.  Batch Deletion. (E)
  1195.  
  1196.               The batch delete operation works just like the batch
  1197.               copy and move operations except that of course there
  1198.               is no destination to enter.  The same window will
  1199.               appear displaying the names of the tagged files and
  1200.               SCOUT will ask for confirmation to delete.  Be
  1201.               careful, because once an affirmative response is
  1202.               given, the operation proceeds non-stop unti all tagged
  1203.               files are deleted.  The string [ DELETED ] will
  1204.               replace each file as it is deleted.  If any tagged
  1205.               files are marked as read-only, they will not be
  1206.               deleted and their names will remain visible on the
  1207.               display.  At the end of the batch delete operation,
  1208.               SCOUT will show an error box saying that an illegal
  1209.               operation was attempted on a read-only file.  As with
  1210.               the batch copy and move operations, SCOUT will display
  1211.               the total number of bytes deleted at the end of the
  1212.               operation.
  1213.  
  1214.           E.  Batch Archive Bit Reset. (^A)
  1215.  
  1216.               SCOUT provides a very fast and convenient way to
  1217.               continually back up data files while working in an
  1218.               application program that is continually updating those
  1219.               files.  It works like this.  Pressing the key
  1220.               combination Ctrl "a" will bring up a window asking if
  1221.               you desire to reset all archive bits.  If you answer
  1222.               yes, SCOUT will reset the archive bits of every file
  1223.               in the directory.  Now, as you work in your
  1224.               application program and valuable data files are
  1225.               updated by your program, the archive bits are set by
  1226.               DOS.  So as you work, SCOUT can readily detect which
  1227.               files have been updated since resetting the bits or
  1228.               since the last update.  To effect backup, press the
  1229.               Ctrl "b" combination at any time.  A window similar to
  1230.               the batch copy window will appear and all files that
  1231.               have been changed will be listed by name.  Enter a
  1232.               valid destination string and SCOUT will copy the
  1233.               marked files to that destination and reset the archive
  1234.               bits again.  This cycle can be repeated over and over
  1235.               as you work and you never have to leave your
  1236.               application program to back up your files!  By the
  1237.               way, once you have entered a destination string and
  1238.               the copy operation has completed, the next time you
  1239.               invoke the copy mode and are prompted for the
  1240.               destination name simply press Ctrl "r" and the
  1241.               previously entered name will automatically be inserted
  1242.               for you.
  1243.  
  1244.      XI.  SCOUT INFORMATION COMMANDS
  1245.  
  1246.      SCOUT offers a number of commands that provide valuable
  1247.      information to the user.
  1248.  
  1249.           A.  Disk Information. (Q)
  1250.  
  1251.               Pressing the "q" key from the main display will bring
  1252.               up a window that shows a number parameters applicable
  1253.               to the active disk, including total bytes available,
  1254.               bytes used and bytes free both in numbers and
  1255.               percentages.
  1256.  
  1257.           C.  Disk Space Available (Alt-D)
  1258.  
  1259.               Pressing Alt-d will result in a window that displays
  1260.               the bytes of disk space available for each drive in
  1261.               the system that is lettered C and above (including RAM 
  1262.               disks).  Drives A and B are ignored since they are
  1263.               usually floppy drives and don't contribute that much to
  1264.               the overall system.
  1265.  
  1266.           C.  Version Information. (N)
  1267.  
  1268.               The "n" key will bring up a window showing the SCOUT
  1269.               version number, maximum number of files, maximum
  1270.               number of directories, file buffer size, and the
  1271.               current setting of the copy mode.
  1272.  
  1273.           D.  File Mask Settings. (J)
  1274.  
  1275.               In order to see what the current file mask settings
  1276.               are or to change them, press the "j" key.  A window
  1277.               will appear displaying the file mask string
  1278.               assignments to the ten number keys.  Any one or more
  1279.               of these can be changed for the duration of the
  1280.               current session.  To permanently change a file mask
  1281.               setting, use the configuration program.
  1282.  
  1283.           E.  Function Key Settings. (K)
  1284.  
  1285.               Function key macro settings can be viewed or changed
  1286.               in exactly the same manner as the file masks.
  1287.               Pressing the "k" key will bring up a menu showing the
  1288.               current function key assignments.  Changes can be made
  1289.               for the duration of the session only.
  1290.  
  1291.           F.  SCOUT Calendar. (^L)
  1292.  
  1293.               Pressing the combination Ctrl "l" will bring up a
  1294.               calendar with the current date blinking.  Advance the
  1295.               month by pressing up arrow key and retard the month by
  1296.               pressing the down arrow key.  The entire year may be
  1297.               advanced/retarded by pressing the righ/left arrow keys
  1298.               respectively.  Pressing the Home key will re-display
  1299.               the current month and year.  The year will not retard
  1300.               below 1980 (the DOS minimum).
  1301.  
  1302.           G.  SCOUT ASCII Table. (])
  1303.  
  1304.               SCOUT will display an ASCII table if the right square
  1305.               bracket key ("]") is pressed.  Pressing the down arrow
  1306.               key will scroll the table up and pressing the up arrow
  1307.               key will scroll the table up.  PgDn will scroll up a
  1308.               full page and PgUp will scroll down a full page.  Home
  1309.               will return to the beginning of the table and End will
  1310.               display the last page of the table.
  1311.  
  1312.           H.  Memory Allocation. (W)
  1313.  
  1314.               SCOUT will display a list of all programs currently in
  1315.               RAM and the number of bytes each is occupying.  Press
  1316.               the "w" key to bring up a window displaying this data.
  1317.               Please note that for DOS 3.X actual program names will
  1318.               be displayed but in the case of DOS 2.X that
  1319.               information is not readily available, so SCOUT
  1320.               enumerates the programs by labeling them program1,
  1321.               program2, etc.
  1322.  
  1323.           I.  Catalog Information. (Z)
  1324.  
  1325.               SCOUT keeps all of the directory names from the
  1326.               currently active disk in a catalog.  The catalog is
  1327.               accessable via the "z" key.  The catalog is displayed
  1328.               in up to 5 pages of 20 directory names in each page.
  1329.               Page up or down through the catalog with PgUp and PgDn
  1330.               keys.  Each directory name is indexed by an alphabetic
  1331.               character from "A" through "T".  Pressing Ctrl "p"
  1332.               while viewing the catalog will result in a formatted
  1333.               listing of all directories in the catalog to the
  1334.               printer.  Pressing a letter key that is associated
  1335.               with a directory name will result in SCOUT changing to
  1336.               that directory.
  1337.  
  1338.               The "b" key will bring up exactly the same display of
  1339.               the catalog as the "z" key except that pressing a
  1340.               letter key associated with a directory name will
  1341.               change the SCOUT default directory.  The SCOUT default
  1342.               directory is the directory that SCOUT will make active
  1343.               when the Esc key is pressed from the main display to
  1344.               return control to your application program.
  1345.  
  1346.           J.  Text File Viewing. (R)
  1347.  
  1348.               A text file may be browsed by placing the cursor over
  1349.               the desired file name and pressing the "r" key.  SCOUT
  1350.               will display 23 lines of the file at a time.  You can
  1351.               page back and forth through the file using the PgUp
  1352.               and PgDn keys.  The Home key will show the first page
  1353.               of the file.  The End key will take you to the end of
  1354.               the file.  Note that if the file is a long one, there
  1355.               will be some delay while SCOUT indexes the pages on
  1356.               the way through to the end of file marker.  Once this
  1357.               has occurred, pressing the End key from anywhere in the
  1358.               file will instantly take you to the end of the file.
  1359.               Any page of the file may be printed by pressing Ctrl
  1360.               "p".  Use the Esc key to exit the file browse mode.
  1361.  
  1362.               SCOUT will search the text file being viewed for a
  1363.               specified string.  Press the "F" key while a text file
  1364.               is being browsed.  A box will pop up prompting for a
  1365.               search string.  The search is case sensitive.  Typing
  1366.               in a string and pressing return will start a search
  1367.               (forward only) through the file for the specified string.
  1368.               If the string is not found then a message to that
  1369.               effect is displayed in the box.  If found, the page
  1370.               containing the target string is displayed and all
  1371.               occurrences of the string will be blinking.  In fact,
  1372.               you can continue to browse back and forth through the
  1373.               file from this point and every occurrence of the string
  1374.               will blink.  To stop the blinking, press "F" and just
  1375.               enter a carriage return in response to the prompt or 
  1376.               move to the end of the file. If the "C" key is pressed 
  1377.               following a search and location of a string, SCOUT will 
  1378.               continue the search to the end of the file.
  1379.  
  1380.               The file viewing function is limited to operation on files
  1381.               that contain less than 400 23 line pages.  Since line
  1382.               lengths may widely vary, this means the exact file size
  1383.               limit cannot be determined.  When paging to the end of the
  1384.               file, SCOUT will stop paging and show END OF FILE when the
  1385.               400th page is reached, even though the actual end of file
  1386.               has not been reached.
  1387.  
  1388.           K.  ARC File Directory Listing. (R)
  1389.  
  1390.               ARC files are files that have been compressed by
  1391.               commonly available utilities like ARC and PKARC.  Any
  1392.               such file with an .ARC extension that is a valid ARC
  1393.               file may accessed to display its directory of file
  1394.               entries.  Just place the cursor of an ARC file and
  1395.               press the "r" key.  If SCOUT finds that it is indeed a
  1396.               valid ARC file, a window will appear that shows the
  1397.               directory listing in pages of pages of 18 entries
  1398.               each.  Each entry displayed has the ARCed file name,
  1399.               the date, the time, the uncompressed file size, the
  1400.               compressed file size, and the method used in
  1401.               compression.  The method is coded as follows:
  1402.  
  1403.                            CR   -   Crunched
  1404.                            PA   -   Packed
  1405.                            ST   -   Stored
  1406.                            SQ   -   Squeezed
  1407.                            SU   -   Squashed (PKARC only)
  1408.                            UN   -   Unknown
  1409.  
  1410.               To get a printed listing of the ARC file directory,
  1411.               press Ctrl "p" at any time while displaying the file
  1412.               names.
  1413.  
  1414.           L.  Search for a File. (Y)
  1415.  
  1416.               SCOUT will search an entire disk for a file name and
  1417.               report all directories where the target file was
  1418.               found.  Press the "y" key and a window will appear
  1419.               requesting entry of a file name or file mask.  Any
  1420.               legal DOS file name and/or wild cards ("*","?") are
  1421.               acceptable.  If you desire to search a disk other than
  1422.               the disk that is currently active, just immediately
  1423.               preceed the file specification string with the drive
  1424.               letter and a colon.  For example, suppose you are on
  1425.               drive C and wish to search drive D for all files with
  1426.               an extension of .PAS.  At the prompt, enter D:*.PAS
  1427.               and SCOUT will change to drive D before conducting the
  1428.               search.  As SCOUT finds files matching the entered
  1429.               specification, they will be listed in the window along
  1430.               with their parent directory name.  If more than 16
  1431.               matches are found, SCOUT will pause at the 16th match.
  1432.               Thus SCOUT will display finds in groups of 16.
  1433.               Pressing the escape key at any pause aborts the
  1434.               search.  A listing of the current screen can be
  1435.               obtained by pressing Ctrl "p" at any pause.  If no
  1436.               match is found, SCOUT will display a blinking message
  1437.               to that effect.
  1438.  
  1439.           M.  Scan the Disk. (S)
  1440.  
  1441.               If any directories are renamed, deleted, or created
  1442.               other than through SCOUT commands, it will be
  1443.               necessary to update the catalog.  Press the "s" key
  1444.               and window will appear informing you that the scan is
  1445.               in progress.  SCOUT will scan the all system disks and
  1446.               enter all directory names found in the catalogs.  On
  1447.               most hard disks the scan only takes a few seconds or so,
  1448.               but the time required is dependent upon how many
  1449.               directories are present, how deep they are nested, and
  1450.               the performance of the disk itself.  Note:  DO NOT
  1451.               nest directories over five levels (including the root
  1452.               directory) deep.  This slows DOS performance and can
  1453.               cause SCOUT to malfunction during a scan.  Note that 
  1454.               SCOUT will start with the last active fixed drive in the
  1455.               system and end with the first.
  1456.  
  1457.      XII.  EXECUTING PROGRAMS FROM SCOUT
  1458.  
  1459.      SCOUT is the only memory resident program known to have the
  1460.      capability to execute programs.
  1461.  
  1462.           A.  Run a Program. (CR)
  1463.  
  1464.               First, remember that you MUST have placed RUNFILE.EXE
  1465.               in the root directory of the disk drive from which
  1466.               SCOUT is to be initially loaded into memory in order
  1467.               for you to successfully run a program from SCOUT.
  1468.  
  1469.               The easiest and most direct method of running a
  1470.               program from SCOUT is to move the cursor to a .COM,
  1471.               .EXE, or .BAT file and press return.  SCOUT will
  1472.               execute the program.  When you exit the program, a
  1473.               prompt will appear asking if you wish to return to
  1474.               SCOUT.  If so, pressing "y" will activate SCOUT again
  1475.               in the same directory from which you ran the program.
  1476.               If not, pressing "n" will leave you at the DOS level.
  1477.               Note:  YOU CANNOT RUN A PROGRAM FROM SCOUT UNLESS YOU
  1478.               CALLED SCOUT FROM THE DOS LEVEL!  But you may activate
  1479.               SCOUT from the program you executed from SCOUT.  Just
  1480.               be sure to terminate the program before attempting to
  1481.               run another program.
  1482.  
  1483.               In many cases it may be desirable to pass the program
  1484.               you desire to run parameters via the command line.
  1485.               Just press the slash ("/") key with the cursor over
  1486.               the name of the program you desire to run.  A window
  1487.               will appear prompting you for the command line string.
  1488.               Enter it and press return.  SCOUT will pass the
  1489.               entered string to the executed program just as if you
  1490.               had invoked the program from the DOS command line.
  1491.  
  1492.           B.  The Program Menu. (\)
  1493.  
  1494.               The configuration program permitted you to enter up
  1495.               to 10 program names, parent directories, and flags
  1496.               indicating whether or not to pause for command line
  1497.               parameters.  This menu may be invoked by pressing the
  1498.               backslash key ("\").  A window will appear that
  1499.               displays the program names you defined, the directory
  1500.               names they are located in, and stars ("*") for any you
  1501.               marked to pause for command line parameters.  Each
  1502.               program is indexed by a function key.  Press the
  1503.               function key associated with program that you desire
  1504.               to execute.  If that program is flagged with a star,
  1505.               the command line parameter window will appear and
  1506.               request entry of the parameter string before the
  1507.               program is executed.
  1508.  
  1509.               The power of using the menu is that you can define
  1510.               programs that reside on disks other than the default
  1511.               drive and SCOUT will effect both appropriate drive and
  1512.               directory change so that the program can be executed
  1513.               from its parent directory.  Just be sure to enter the
  1514.               full proper path specification in the configuration
  1515.               program.
  1516.  
  1517.           C.  SCOUT .CMD menus. (Alt-C)
  1518.               
  1519.               SCOUT now supports user creation of ASCII text
  1520.               command menus.  You may use any standard text editor
  1521.               to create an ASCII file that contains up to ten lines
  1522.               of commands.  Each command may be the name of a program
  1523.               or a valid DOS command.  SCOUT will execute the command
  1524.               just as if you typed and entered it from the DOS prompt.
  1525.               The ASCII file must be named SCOUT.CMD and you may have
  1526.               a separate CMD file in each of your directories.  Here
  1527.               is an example:
  1528.  
  1529.                       basica
  1530.                       QEDIT myprog.bas
  1531.                       qedit newprog.pas
  1532.                       MASM
  1533.                       Wordstar
  1534.                       chkdsk /f
  1535.                       diskcopy a: a:
  1536.                       mode mono
  1537.                       debug
  1538.  
  1539.               Note that character case is not significant.  Each file
  1540.               must have at least one line but only the first ten lines
  1541.               will be read by SCOUT as commands.  If SCOUT is up and
  1542.               you are viewing the files in a directory that contains a
  1543.               command file (SCOUT.CMD), then pressing Alt-C will bring
  1544.               up a menu similar to the favorite program menu.  Example:
  1545.  
  1546.                       F[1 ]  BASICA
  1547.                       F[2 ]  QEDIT MYPROG.BAS
  1548.                       F[3 ]  QEDIT NEWPROG.PAS
  1549.                       F[4 ]  MASM
  1550.                       F[5 ]  WORDSTAR
  1551.                       F[6 ]  CHKDSK /F
  1552.                       F[7 ]  DISKCOPY A: A:
  1553.                       F[9 ]  MODE MONO
  1554.                       F[10]  DEBUG
  1555.  
  1556.                     Function key selects program to execute
  1557.  
  1558.               Remember, you may have one of these files in any or all
  1559.               directories on each drive in your system.  If nothing
  1560.               happens when you press Alt-C, it means SCOUT was unable
  1561.               to find a file name SCOUT.CMD in the current active
  1562.               directory.  Be sure to use an editor or word processor
  1563.               that produces pure ASCII files and that any commands placed
  1564.               in the file are valid DOS commands.
  1565.  
  1566.      XIII.  MISCELLANEOUS COMMANDS
  1567.  
  1568.            A. Saving the Screen to a File. (^V)
  1569.  
  1570.               Pressing Ctrl-V with with the main SCOUT display up
  1571.               will cause SCOUT to save the screen image that was
  1572.               present before SCOUT was activated.  The screen image
  1573.               will be converted to ASCII text and saved to a disk
  1574.               file.  The file name is SCREEN.DAT and it will be
  1575.               written to the default directory.  If SCREEN.DAT
  1576.               exists, SCOUT will append the screen data to it
  1577.               otherwise it will create the file.
  1578.  
  1579.            B. Printing a Graphic Screen Image. (^G)
  1580.  
  1581.               If SCOUT was loaded with the "g" parameter on the
  1582.               command line and a Color Graphics Adaptor (CGA) or
  1583.               Enhanced Graphics Adaptor (EGA) emulating the CGA in
  1584.               use, SCOUT will save a graphics screen image when
  1585.               activated.  Pressing Ctrl-G will cause SCOUT to send
  1586.               the saved graphics image to the printer.  This will
  1587.               only work properly on IBM graphics printers or
  1588.               printers capable of operating in the IBM graphics mode
  1589.               like the Epson FX series.  A menu will pop up offering
  1590.               a selection of either the IBM graphics or Epson
  1591.               printer.  The printed image will be rotated 90 degrees
  1592.               so that the screen image perspective is preserved in
  1593.               the printing.
  1594.  
  1595.           C.  Format a Floppy Disk. (F)
  1596.  
  1597.               SCOUT will even let you format a floppy disk (3.5" and
  1598.               5.25").  Pressing the "f" key at the main display will
  1599.               pop up a window prompting to enter a drive designator.
  1600.               Press the appropriate drive letter.  You will then be 
  1601.               prompted to enter a "3" or a "5", depending upon 
  1602.               whether you are formatting a 3 1/2" or 5 1/4" floppy.
  1603.               If you are usin SCOUT on an AT or compatible, SCOUT 
  1604.               will then ask if you want to format a high density drive.  
  1605.               High density drives are those capable of formatting 
  1606.               a 5 1/4" high density 1.2M disk or a 3 1/2" 1.4M disk.  
  1607.               Regular density disks are formatted at 360KB and 
  1608.               720KB, respectively.  When ready to format, press Return.
  1609.               If the drive has been previously formatted, it may
  1610.               contain files you don't wish to destroy.  SCOUT will
  1611.               issue a warning in this case and give you the option
  1612.               of aborting the format.  Otherwise SCOUT will go ahead
  1613.               and format the disk and show you (track by track) its
  1614.               progress as it does.  SCOUT will also warn you if the
  1615.               disk is write-protected.  If the drive door happens to
  1616.               be open and you don't close it before formatting
  1617.               begins, SCOUT will rush through the formatting and
  1618.               then bring up the error box informing you that there
  1619.               was an error in formatting.
  1620.  
  1621.      XIV.  EXPANDED MEMORY VERSION
  1622.  
  1623.               There is a version of SCOUT (not included in the
  1624.               regular distribution package) that runs in Expanded
  1625.               Memory (EM).  This version can be used with any EM
  1626.               board and software drivers that conform to the Lotus,
  1627.               Intel, Microsoft (LIM) Expanded Memory Specification
  1628.               (EMS) version 3.4.  If you have the EM version of
  1629.               SCOUT, then you should have the following files:
  1630.  
  1631.                               SCOUT-EM.COM
  1632.                               SCOUT-EM.000
  1633.                               RUNSCOUT.COM
  1634.                               REMOVE.COM
  1635.                               CONFIG.COM
  1636.                               RUNFILE.EXE
  1637.                               CALLSCT.COM
  1638.                               LOAD-EM.DOC
  1639.                               WHAT'S.NEW
  1640.  
  1641.               SCOUT-EM is configured and installed exactly the same
  1642.               as SCOUT but it is loaded differently.  The only
  1643.               command line parameter recognized by SCOUT-EM is the
  1644.               "m" parameter for composite video monitors.  When
  1645.               SCOUT-EM loads, it first determines that an EMS driver
  1646.               is present and requests eight 16k pages from the
  1647.               Expanded Memory Manager (EMM).  If the EMM is not
  1648.               present or is unable to allocate 8 pages to SCOUT-EM,
  1649.               then SCOUT-EM aborts with an appropriate error
  1650.               message.  If everything is ok, SCOUT-EM loads itself
  1651.               into the allocated EMS pages and is ready to be called
  1652.               by the regular RAM-resident driver, RUNSCOUT.COM.
  1653.               RUNSCOUT.COM should be loaded immediately after
  1654.               running SCOUT-EM.  This driver contains keyboard
  1655.               interrupt handler code and the code that will map
  1656.               SCOUT-EM code into the active EM page frame when
  1657.               SCOUT-EM is called.  RUNSCOUT.COM will occupy
  1658.               approximately 5K bytes of normal RAM.
  1659.  
  1660.               Operationally, SCOUT-EM will perform exactly as the
  1661.               regular version of SCOUT, except since it is running
  1662.               in EM, it takes up a lot less memory in normal RAM.
  1663.               SCOUT-EM is removed from EM and regular RAM by running
  1664.               the program REMOVE.COM.  The default operational
  1665.               parameters for SCOUT-EM are:
  1666.  
  1667.                          files/directory     700
  1668.                          directorys/disk     200
  1669.                          file buffer size    15,360 bytes
  1670.  
  1671.               SCOUT-EM has been tested in conjunction with other
  1672.               software that utilizes EM such as Software Carousal
  1673.               and Lightning and Vcache, two hard disk cache
  1674.               programs.  AT users may have problems with some
  1675.               configurations if the system you are running under is
  1676.               using a combination of expanded and extended memory
  1677.               and the RAM disk resides in expanded memory.  This
  1678.               only occurs when an attempt is made to put the overlay
  1679.               file (SCOUT.000) on a RAM disk that is in extended/
  1680.               expanded memory and/or when attempting to copy files
  1681.               to/from a RAM disk that is in expanded memory.
  1682.  
  1683.               SCOUT-EM does not operate properly with DESQView.  If
  1684.               you load SCOUT-EM ahead of DESQView and activate it
  1685.               only when the DESQView main menu is not present and
  1686.               with no tasks running in the background, you may not
  1687.               have any problems.  Quarterdeck has very graciously
  1688.               offered me technical help to make SCOUT-EM compatible
  1689.               with their fine product, so I hope to have fix soon.
  1690.  
  1691.      XV.  Compatibility
  1692.  
  1693.               SCOUT is compatible with the IBM PC/XT and PC AT.  It 
  1694.               should operate on any truly compatible computer with 
  1695.               no problems.  It has been tested with PC DOS 2.1, PC 
  1696.               DOS 3.1/3.2, MS DOS 2.1, and MSDOS 3.1.  Some lap top
  1697.               portables have display screens that are supported by a 
  1698.               graphics card but do not show actual colors.  Loading 
  1699.               SCOUT with an "m" on the command line should solve an 
  1700.               display problems with these machines.
  1701.  
  1702.      XVI.  SCOUT Command Key Summary
  1703.  
  1704.      The following is a list of all the SCOUT command keys with a 
  1705.      brief summary statement of the function of each.
  1706.  
  1707.           A  -  Change file attribute.
  1708.          ^A  -  Reset archive bits for all files in current 
  1709.                 directory.
  1710.           B  -  Show catalog - change default directory.
  1711.          ^B  -  Batch copy files changed since last backup.
  1712.           C  -  Copy file under the cursor bar.
  1713.          ^C  -  Enable or disable CRC checking during file copy.
  1714.       Alt-C  -  Displays command menu from active directory (SCOUT.CMD)
  1715.           D  -  Change drive.
  1716.       Alt-D  -  Show unused for each disk drive in system.
  1717.          ^D  -  Change system time/date.
  1718.           E  -  Erase tagged files.
  1719.           F  -  Format a floppy disk.
  1720.          ^F  -  Change file time/date.
  1721.           G  -  Batch copy tagged files.
  1722.          ^G  -  Print saved graphics screen image.
  1723.          ^H  -  Command summary window.
  1724.           I  -  Create new directory.
  1725.           J  -  View/set file mask settings.
  1726.           K  -  View/set function key macro settings.
  1727.          ^K  -  Disable/enable primary hot key combination.
  1728.           L  -  Create new volume label.
  1729.          ^L  -  Calendar display.
  1730.           M  -  Batch move tagged files.
  1731.           N  -  Version window.
  1732.           O  -  View/change sort option.
  1733.           P  -  Printer control code menu.
  1734.          ^P  -  Print listing of current or all directories.
  1735.           Q  -  Disk information.
  1736.           R  -  Read text file or read ARC file directory.
  1737.          ^R  -  Recall last entered path name (when prompted).
  1738.          ^R  -  SCOUT registration form print from main menu.
  1739.           S  -  Perform scan and update directory catalog.
  1740.          ^S  -  Strip and copy file.
  1741.           T  -  Retag copied files.
  1742.          ^T  -  Initiate auto-tag from present cursor postion.
  1743.           U  -  Untag all tagged files.
  1744.           V  -  Move individual file.
  1745.          ^V  -  Save text screen image to text file.
  1746.           W  -  Show system memory allocation.
  1747.           X  -  Refresh the main display.
  1748.          ^X  -  Display alternate program execution menu.
  1749.           Y  -  Search for one or more files.
  1750.           Z  -  Display catalog - change directory.
  1751.          ^Z  -  Print file.
  1752.         Del  -  Delete highlighted file/directory/volume label.
  1753.         Ins  -  Rename highlighted file/directory/volume label.
  1754.        ^PgUp -  Change to parent directory.
  1755.         Home -  Change to root directory.
  1756.          End -  Return to default directory.
  1757.         ^End -  Remove from memory.
  1758.         PgUp -  Show previous page of files.
  1759.         PgDn -  Show next page of files.
  1760.            + -  Tag a file.
  1761.            - -  Untag a file.
  1762.            ] -  Show ASCII table.
  1763.            \ -  Display executable program menu.
  1764.            / -  Run program with command line parameters.
  1765.          TAB -  Move cursor to top or bottom of display column.
  1766.    Shift-TAB -  Purge the current directory of all files.
  1767.            > -  Move cursor to end of displayed page.
  1768.            < -  Move cursor to top of displayed page.
  1769.  
  1770.      Pressing F1 - F10 at the main SCOUT display will change 
  1771.      to the directory to the assigned macro string.
  1772.  
  1773.      Pressing 0 - 9 at the main SCOUT display will show only those 
  1774.      files matching the assigned file mask.
  1775.  
  1776.      Thank you very much for trying SCOUT!
  1777.